JUAL FIRMWARE STOCK ROM ORIGINAL ALL HANDPHONE BI ONLY: TUTORIAL CARA FLASH SONY ERICSSON DENGAN JD FLASHER . name='jual dvd firmware nokia bi only cdma apac sony ericsson se universal setool motorola siemens beserta free tutorial download dari support'/> Free xml sitemap generator

FIRMWARE ALL HANDPHONE BI ONLY

KAMI MENYEDIAKAN ALL FIRMWARE BI ONLY APAC REGIONAL.

SEMUA FIRMWARE YANG KAMI TAWARKAN ADALAH FIRMWARE YANG TELAH KAMI DOWNLOAD DARI SUPPORT, DAN TELAH KAMI PILIH FILE YANG BERISIKAN FILE BER_BAHASA INDONESIA.
JADI REKAN-REKAN SEMUA TINGGAL COPY PASTE KE DIRECTORY PADA PC, BUKAN FILE INSTALLER YANG HARUS MENG_INSTAL TERLEBIH DAHULU.

KONFIRMASI:
+6281 328 444 275......Tlp/sms
eksekutive@yahoo.com

TUTORIAL CARA FLASH SONY ERICSSON DENGAN JD FLASHER

Diposkan oleh Firmware HP Jumat, 18 September 2009

JD Flasher flasher is now full flashing and patching tool.
It supports db2010, db2012, db2020 flashing and patching all CIDs. PNX5230 only flashing is supported.
For A2 phones check out A2uploader.
You can find out about phone platform from the phone.
You can thus perform all customizations like uploading flash menus, acoustics, walkman skins etc.

Step 1
To work XS++ software , you need to install USB flash drivers to your computer.
DRIVER:

JD FLASHER ALL CID:



Now switch off your phone.
Hold down the “C” button on your phone and plugin the USB cable
Windows will detect a flash device.
If Windows doesn’t install them automatically Enter the path where you extracted the flash drivers.
Well done step one completed

Step 2

Connecting phone to JDflasher.

1. Shutdown phone.
2. Start Far Manger.
3. Press Alt+F1, select JDflasher.
4. In script, choose a phone if available else choose script as db2010/db2020.
5. Speed select the max, and port is DCU-60 as always.
6. Hit Jump Down Into a Large Rabbit hole.
7. Reinsert battery.
8. Connect phone holding C.
9. Wait for Initialization.

Note on Exit: In order to successfully shutdown phone, you just move to root by clicking … option at the top and JDflasher will ask if you want to quit. Always exit after you finish your operations.
Getting back once you are in will at least 2 options and maximum of 4 options depending upon your phone and depending upon the script. All phones will get ofs/oflash. The four options are,
1. oflash >> Regular FW Flashing Mode to flash firmware/debrand/Crossflash.
2. ofs >> Usual Far Manager usage mode to upload thing to FS
3. bfs >> breakin FS mode with FS read.
4. bflash >> breakin FW flashing mode used for vkp and mod babe flash.

Step 3
Using JDFlasher !
Oflash/Flashing for Firmware/Debranding/flashing vkp etc.
1. Start JDflasher.
2. Connect phone to JdFlasher as said above.
3. Enter oflash mode.
4. On right side navigate to firmware location on computer.
5. Select firmware in the right side.
6. Press F5.
7. Click Copy.
8. Then Ensure that the option flash as babe image is selected. (babe for firmwares, mbn, fbn)
9. Click “Yeah Flash it”.
10. Wait for flashing of all blocks to complete.
You can flash main/fs using jdflasher. To debrand the phone flash both the main and fs. Also remember after flashing FS you need to add the CDA. Download CDA and copy them to tpa/preset/custom using ofs. If you forget to add the cda files to phone fs using ofs then you will end up getting a Configuration Error.

Step 4
Ofs/Customization:
1. Start Jdflasher.
2. Select script.
3. Connect phone as told.
4. Enter ofs.
5. Navigate in the file system and upload files according.
6. Check out the video given, it shows uploading of files to phone file system.
7. Using Ofs option you can upload flash menus, acoustics, camera drivers, skins etc
8. To exit from OFS you should move to Root by clicking … ! They finally click ok and exit jdflasher.
Important NOTES:
Note db2010 users: Make sure that the REST file for your phone is present in JDflasher Rest Directory. If not just use the mkrest2.exe to make the rest file. Just Drag your FS Fbn file on mkrest2 to get the REST file for your phone. Mkrest2 is given with JDflasher in REST folder.
Note db2020 users: If you use any of the breaking methods while using db2020 script then you will have to re flash main firmware always before exit.
Bfs/Breakin FS: Is same as ofs but with FS read, which means you can copy files from phone FS to your computer.
Bflash/Breaking Flash: Used to apply patches, can be used to flash firmware also. Now a quick tutorial to apply patches for db2010.
1. Connect phone.
2. Enter Bflash.
3. Navigate to patch on right side.
4. Hit F5.
5. Click Copy.
6. Ensure the option flash as vkp is selected
7. Click Yeah flash it.
8. Wait for patch flash.
9. Then apply more patches.
10. Then Exit by moving to root.
If you wanted to remove a patch, select the patch that you had applied, press F5, Click copy, then you will find the usual options and also a option to check/select remove patch. Select the option and hit yeah flash it.

Description: TUTORIAL CARA FLASH SONY ERICSSON DENGAN JD FLASHER Rating: 3.5 Reviewer: Firmware HP ItemReviewed: TUTORIAL CARA FLASH SONY ERICSSON DENGAN JD FLASHER

INFO UPDATE

UPDATE FIRMWARE BULAN INI:
*** Stock Rom ANDROID CHINA...Up
*** Flashtool CROSS/EVERCOSS/MITO/iCHERRY...Up
*** Firmware Samsung...Up
*** Firmware Setool...Up

*** Firmware Nokia...Up